Wall Mounting Refrigerator

Charismatically thin refrigerator (Only 10cm deep).
Use of Peltier technology to make the world’s thinnest refrigerator.
Weighs only 5.3 kg, making it easy to relocate.
It has 5 liters of a cabin which can be used to cool Water Bottler, soft drinks, chocolates, and anything that you need just handy.
Energy-saving technology with a typical power consumption of 12W only.
Use of Japanese-made high-performance fan, which keeps the operation silent.
Spill drip technology to protect products from accidental spillage.
Received the 2018 Good Design Award in Japan for its extremely cute & thin design.
It comes with trusted Japanese technology, which is well known for its profound accuracy and durability.
Helps you preserve mother nature for the next generation (As It is free from hazardous gases that are normally used in a typical refrigerator)
Perfect for hotels, banks, hospitals, and care facilities with limited space.
A well-known product in Japan and its periphery

Design & Dimensions

The small form factor makes it easy to install on any wall of the room (Height = 355 mm, Width = 392 mm, Depth = 104 mm)
Designed to mount on the wall, to save floor or desk space, with a Configurable door opening in the clockwise and anti-clockwise direction at the time of installation.
3 Water bottles or 6 cans of drinks can be cooled down to 5°C in just 3-4 hours, and then it maintains the same temperature with negligible power consumption.
Available in Ivory white or black colors, which entice at a single glance.

Model	TWHR-5L (BR, BL / WR, WL)
Exterior Color	Black / White
Exterior dimensions	W355mm × D104mm
Body weight	Approx. 5.3 kg
AC Cord	1.5m
Power consumption	12 W (Max. 68 W)
Cooling unit	Peltier unit
Cold storage temperature	5 °C ± 1.5 °C (When the room temperature is 25 °C)
Power supply	230 ~ 100 VAC (50/60 Hz), in Switch ON/OFF mode
Refrigerator capacity	5 L (Refrigerator internal 72 mm)
Cooling method	Internal heat conduction method
Door opening method	Opens horizontally (*Please state the precautions regarding the door opening direction.)
Drip-proof construction	Water from tops on the top is prevented from entering the air exhaust port.
Thermal insulation construction	Vacuum insulation and urethane foam are used for the thermal insulation (supports thinner designs)
Vibration and noise countermeasures	A quiet fan is used and sound absorption material is attached to the air exhaust.
Door seal	Packing magnet adhesion method

The photographs in the catalog are for illustration purposes only. The actual colors may vary slightly depending on the lighting, angle, and surrounding colors.
Do not place objects on top of this product because the product could fall.
Regularly maintain the drain at the bottom of the product to prevent mold from growing.
Regularly maintain the filter at the bottom of the product to prevent a decline in cooling performance due to clogging with dust.
The screws used for mounting on the wall will differ depending on the shape and material of the wall, so the customer is required to provide the screws.
About 3 to 4 hours is required for the temperature inside the refrigerator to change from 25 °C to 5 °C.
Use this product indoors out of direct sunlight. The performance of this product is not guaranteed when used outdoors or in a vehicle.
Only use this refrigerator to hold food and drink. Storing chemicals in it could cause discoloration or corrosion.
The shape may be changed without notice.

Here is a glimpse of the Upgraded Version of Wall Mounted Refrigerator (To be Launched soon…)